Using Paintless Dent Repair to Take Out Dents From Hail

So you want to know how Hail Damage is repaired with paintless dent removal. This video will show you the professional way that we take the hail dents out of your car using the Paintless Method.

There are some DIY methods of removing dents that may work for you but most probably won’t. You may have heard of taking dents out using dry ice or heating up the dent with a hair dryer and using the cold freezing air from an air duster can  that will pop the dents out. Maybe you can just pull them out with a plunger or suction cup. I have even heard people say they just leave it out in the hot sun and this will cause the hail dents to pop right out. The problem with these methods is that most of them will not work or provide a quality repair and you may just end up damaging the paint.

Professional Paintless Dent Removal

By using Professional Paintless Dent Repair to take out the hail dents, you are choosing the method that vehicle manufactures and insurance companies recommend to repair your vehicel with a better quality repair in a shorter amount of time.

We first have a big quarter to half dollar size dent that is out in the open area of the panel. You can see this in the video showing the underside of the hood. We us a special PDR tool with special tips on it that we use to get on the underside of the panel and then we will likely just push up the metal thus removing the dent.

This method of paintless dent repair you could try to do-it-yourself but if you don’t have any experience with it could be difficult because of the special techniques needed.  We use our special PDR lights to see exactly where we are pushing the dent from under the panel and we make several small little pushes with light pressure “massaging” up every little spot.

Some people have come to me and said they tried to remove the hail dents them self and they have just caused further damage that will not be possible to repair anymore with PDR. What will happen is if you go and push on the dent and you think you just gonna pop it out you actually bust the paint by pushing too hard or you can make little marks in the paint or in the metal from pushing too much.

There is your video demonstration on how to fix the hail damage with paintless dent removal. If you try the DIY Dent Removal method and it just didn’t work out for you or your vehicle got hale damage and you just want the professionals to fix it for you, then give me a call here at Excel Dent Removal over in Blaine Minnesota. My phone number is 763-780-4000 or just visit me on my website at http://www.exceldentremoval.com

Excel Dent Removal
1550 91st Ave NE
Suite 303
Blaine, MN 55449

Phone: 763-780-4000

Excel Dent Removal Website

Advertisements