Using Paintless Dent Repair to Take Out Dents From Hail

So you want to know how Hail Damage is repaired with paintless dent removal. This video will show you the professional way that we take the hail dents out of your car using the Paintless Method.

There are some DIY methods of removing dents that may work for you but most probably won’t. You may have heard of taking dents out using dry ice or heating up the dent with a hair dryer and using the cold freezing air from an air duster can  that will pop the dents out. Maybe you can just pull them out with a plunger or suction cup. I have even heard people say they just leave it out in the hot sun and this will cause the hail dents to pop right out. The problem with these methods is that most of them will not work or provide a quality repair and you may just end up damaging the paint.

Professional Paintless Dent Removal

By using Professional Paintless Dent Repair to take out the hail dents, you are choosing the method that vehicle manufactures and insurance companies recommend to repair your vehicel with a better quality repair in a shorter amount of time.

We first have a big quarter to half dollar size dent that is out in the open area of the panel. You can see this in the video showing the underside of the hood. We us a special PDR tool with special tips on it that we use to get on the underside of the panel and then we will likely just push up the metal thus removing the dent.

This method of paintless dent repair you could try to do-it-yourself but if you don’t have any experience with it could be difficult because of the special techniques needed.  We use our special PDR lights to see exactly where we are pushing the dent from under the panel and we make several small little pushes with light pressure “massaging” up every little spot.

Some people have come to me and said they tried to remove the hail dents them self and they have just caused further damage that will not be possible to repair anymore with PDR. What will happen is if you go and push on the dent and you think you just gonna pop it out you actually bust the paint by pushing too hard or you can make little marks in the paint or in the metal from pushing too much.

There is your video demonstration on how to fix the hail damage with paintless dent removal. If you try the DIY Dent Removal method and it just didn’t work out for you or your vehicle got hale damage and you just want the professionals to fix it for you, then give me a call here at Excel Dent Removal over in Blaine Minnesota. My phone number is 763-780-4000 or just visit me on my website at http://www.exceldentremoval.com

Excel Dent Removal
1550 91st Ave NE
Suite 303
Blaine, MN 55449

Phone: 763-780-4000

Excel Dent Removal Website

Hail Damage Repair

This video shows hail dents being removed with paintless dent repair.

This Chevy SUV had about 40 hail dents in the roof. By removing the headliner we are able to make enough room to use our PDR tools to gently push each dent out from the underside of the panel.

Why Paintless Dent Removal is the Best Option

Paintless Dent Repair is the best option for removing the hail dents from your vehicle. Some of the reasons to choose PDR when you have dents from hail are

  • Saved Time – PDR is a shorter repair process than conventional auto body repair
  • Increase Vehicle Value – You cars value will increase. Not just from repairing the damage but also because repainting you car can decrease it’s value
  • Insurance Approved Repair – Insurance companies recommend PDR for most hail damage repair
  • Safer for the Enviroment – No Paint or harsh chemicals are used in the PDR process. Also, not waste or manufacturing is need for new parts to be replaced

If you are in need of hail damage repair for your vehicle, then contact me today.

Excel Dent Removal

1550 91st Ave NE #303

Blaine, MN 55449

phone: 763-780-4000

Removing a Headliner for Hail Damage Repair

I am often asked about taking out the headliner from a car when we are removing dents caused by hail damage. You will see in this video how the headliner comes down and goes back up with no problems.

This time lapse video will show how we can remove the headliner from this truck for paintless dent repair. You will see how it is held in with just some screws, clips and the side plastic pieces. We take all that apart so that we can lower the head-liner. You can see that the headliner is just one solid piece of material made of fabric, foam and fiberglass that is sandwiched together. We only need to lower it enough so that we can access the underside of the roof panel with our paintless dent removal tools. We usually do not need to take it out of the vehicle. This way none of the electrical wires or the airbag system needs to be removed.

After the Hail Damage is Repaired

Once we are done repairing the hail damage from the roof we will then put the headliner back in place, then putting all the clips and screws back. Then everything is returned back to the way it was. You would never know that it was in for repair.

If you need paintless dent repair for your hail damage, then call me at 763-780-4000 or visit my website at http://www.exceldentremoval.com

Excel Dent Removal
1550 91st Ave NE
Suite 303
Blaine, MN 55449

Phone: 763-780-4000

Subscribe to YouTube Channel

Excel Dent Removal On Youtube

Excel Dent Removal Google+ Page

Excel Dent Removal On Facebook

Excel Dent Removal On Twitter

Excel Dent Removal On Linkedin

Headliner Removal For Paintless Hail Damage Repair