Removing a Headliner for Hail Damage Repair

I am often asked about taking out the headliner from a car when we are removing dents caused by hail damage. You will see in this video how the headliner comes down and goes back up with no problems.

This time lapse video will show how we can remove the headliner from this truck for paintless dent repair. You will see how it is held in with just some screws, clips and the side plastic pieces. We take all that apart so that we can lower the head-liner. You can see that the headliner is just one solid piece of material made of fabric, foam and fiberglass that is sandwiched together. We only need to lower it enough so that we can access the underside of the roof panel with our paintless dent removal tools. We usually do not need to take it out of the vehicle. This way none of the electrical wires or the airbag system needs to be removed.

After the Hail Damage is Repaired

Once we are done repairing the hail damage from the roof we will then put the headliner back in place, then putting all the clips and screws back. Then everything is returned back to the way it was. You would never know that it was in for repair.

If you need paintless dent repair for your hail damage, then call me at 763-780-4000 or visit my website at http://www.exceldentremoval.com

Excel Dent Removal
1550 91st Ave NE
Suite 303
Blaine, MN 55449

Phone: 763-780-4000

Subscribe to YouTube Channel

Excel Dent Removal On Youtube

Excel Dent Removal Google+ Page

Excel Dent Removal On Facebook

Excel Dent Removal On Twitter

Excel Dent Removal On Linkedin

Headliner Removal For Paintless Hail Damage Repair

Advertisements

Paintless Dent Repair Company in MN
Driving Directions to Excel Dent Removal
http://www.exceldentremoval.com

Excel Dent Removal
1550 91st Ave NE
Suite 303
Blaine, MN 55449

Phone: 763-780-4000

When you need a Paintless Dent Repair Company in Minnesota, then choose the experts at Excel Dent Removal in Blaine MN

In this video you will see how easy it is to find our Blaine location.
We are located in an excellent and easy to get to location, just off the Northeast Corner or Hwy 10 and Central Ave.
These Driving Directions will help you find our Paintless Dent Removal Shop in Blaine.
Our office and shop is located in the industrial building that can be seen from Interstate Hwy 10.

Wherever you are coming from in the Twin Cities of Minneapolis and St Paul you can just get to Hwy 10 and take the Central Ave/Hwy 65 Exit.
Go North on Central to the first light which is 93rd Lane. Take a right on 93rd Lane.
Take your next first right on Baltimore Street then follow it down for a few blocks to 91st Ave.
Take a left on 91st Ave and then we are the second building on the right.
Pull into the first entrance and continue to the south side of the building. Excel Dent Removal is in Suite 303 in the middle.

Contact Me to schedule an appointment for your Free Estimate and to make an appointment to repair your vehicle dents.

Paintless Dent Repair to Remove Damage from Cart

It is a windy day out and you have just come out of the store. You are walking towards your car when you see something that gives you a sinking feeling in your stomach.

A shopping cart is against your car door

You rush up to see if it caused any damage and see a big crease dent in your door.

What do you do?

Well there is good news! You can use Paintless Dent Repair to restore you car back to new again.

Mercedes Dent Removal

This Mercedes C300 came into the my Minnesota Paintless Dent Repair Shop to have this crease removed from the door. My customer said she was out shopping and came out to her car and noticed this 4 inch crease in the door. It looks like it was made by a shopping cart because of the way the impact was made and the horizontal scratches that were in the crease.

A crease dent in the door like this is removed with the paintless dent repair method by accessing the back of the panel and slowly working out the dent with special PDR tools. There was an door safety beam inside the door that caused part of the metal to pushed out. This part is hammered back in to make the area smooth.

If you have had a shopping cart hit your car and make a dent, then choose paintless dent repair to restore your vehicle back to new condition without painting.

IF you want your car looking new again, then contact me at Excel Dent Removal 

Contact Me Today for and Excellent Repair

Excel Dent Removal
1550 91st Ave NE
Suite 303
Blaine, MN 55449

Phone: 763-780-4000

You can see more paintless dent repair videos over on my Youtube Channel

https://www.youtube.com/channel/UC258hHbF9oQsneOGZd7djdQ

Removing a Large Dent Without Painting

My customer came to me from Andover MN to have this large dent in the fender of his Chevy Silverado repaired with Paintless Dent Removal. He was backing out of the driveway and didn’t see that the trash can was out. He bumped the garbage can with the truck and caused this large dent in the fender.

large dent from hitting trash can

No Paint Dent Repair

Paintless Dent Repair does not use any of the conventional auto body repair methods like sanding, grinding, filling with plastic and painting. The Paintless Dent Removal method of repairing dents uses special PDR tools that move the metal back out from the inside of the panel. This is the reason that no painting is need to repair dents and dings in your car. Paintless Dent Repair does not damage your existing paint on your vehicle and saves you from losing value in your car because of having the car repainted.

I was able to repair this dent in the fender of the Silverado with Paintless Dent Removal.

You can see the results in this video—> http://youtu.be/T89UUUrIrJE

If you had a minor collision with the trash can, then contact me today to have an Excellent Paintless Dent Repair here at Excel Dent Removal

Excel Dent Removal

1550 91st Ave NE, Suite 303, Blaine MN 55449

phone 763-780-4000

Can Paintless Dent Repair Take Out a Crease?

This is a question I am often asked. Many people want to know if a crease in their car can be removed with the paintless dent repair method. Well… Yes It Can.

With all the DIY, Do-It-Yourself, dent repair videos on Youtube and the places online showing how to get a dent out of your car, the exposure to how professional paintless dent repair is done is limited. Most of those DIY videos will show you that dent repair is done by just “popping” the dent out with suction cups or heat and dry ice or compressed air. So when it comes to having a creased dent in your car it may seem like those methods would not work.

Paintless Dent Repair of a Crease dent in the door of a Volvo

How is Paintless Dent Repair Done?

Professional Paintless Dent Repar is done in multiple ways with PDR tools. We use special hardened steel rods that are used to gently move the metal back out from the inside of the panel. We will use special glue and tabs, that are made especially for PDR so they will not damage the paint, to pull the dents out. This “glue pull” method is not always used to just “pop” the dents out. It is used to pull out the dents to minimize the amount of pushing that we need to do from the inside of the panel. We also use special hammers and tools to “knock down” the crowns and work with the metal on the outside of the panel to properly flatten the area. These hammers are a critical tool in the paintless repair process because of the way the metal reacts when it is dented. It does not just go in but also moves out. This is the reason that the dents don’t just pop out with other methods.

This is the reason that the dents don’t just pop out with other methods.

In this video you will see the Professional Paintless Dent Repair method being used to remove this crease dent from the door of a Volvo. The glue pull method was used to minimize the pushing needed with regular PDR tools and also because of obstructions inside the door panel that made using those dent removal tools impossible.