Using Paintless Dent Repair to Take Out Dents From Hail

So you want to know how Hail Damage is repaired with paintless dent removal. This video will show you the professional way that we take the hail dents out of your car using the Paintless Method.

There are some DIY methods of removing dents that may work for you but most probably won’t. You may have heard of taking dents out using dry ice or heating up the dent with a hair dryer and using the cold freezing air from an air duster can  that will pop the dents out. Maybe you can just pull them out with a plunger or suction cup. I have even heard people say they just leave it out in the hot sun and this will cause the hail dents to pop right out. The problem with these methods is that most of them will not work or provide a quality repair and you may just end up damaging the paint.

Professional Paintless Dent Removal

By using Professional Paintless Dent Repair to take out the hail dents, you are choosing the method that vehicle manufactures and insurance companies recommend to repair your vehicel with a better quality repair in a shorter amount of time.

We first have a big quarter to half dollar size dent that is out in the open area of the panel. You can see this in the video showing the underside of the hood. We us a special PDR tool with special tips on it that we use to get on the underside of the panel and then we will likely just push up the metal thus removing the dent.

This method of paintless dent repair you could try to do-it-yourself but if you don’t have any experience with it could be difficult because of the special techniques needed.  We use our special PDR lights to see exactly where we are pushing the dent from under the panel and we make several small little pushes with light pressure “massaging” up every little spot.

Some people have come to me and said they tried to remove the hail dents them self and they have just caused further damage that will not be possible to repair anymore with PDR. What will happen is if you go and push on the dent and you think you just gonna pop it out you actually bust the paint by pushing too hard or you can make little marks in the paint or in the metal from pushing too much.

There is your video demonstration on how to fix the hail damage with paintless dent removal. If you try the DIY Dent Removal method and it just didn’t work out for you or your vehicle got hale damage and you just want the professionals to fix it for you, then give me a call here at Excel Dent Removal over in Blaine Minnesota. My phone number is 763-780-4000 or just visit me on my website at http://www.exceldentremoval.com

Excel Dent Removal
1550 91st Ave NE
Suite 303
Blaine, MN 55449

Phone: 763-780-4000

Excel Dent Removal Website

Hail Damage Repair

This video shows hail dents being removed with paintless dent repair.

This Chevy SUV had about 40 hail dents in the roof. By removing the headliner we are able to make enough room to use our PDR tools to gently push each dent out from the underside of the panel.

Why Paintless Dent Removal is the Best Option

Paintless Dent Repair is the best option for removing the hail dents from your vehicle. Some of the reasons to choose PDR when you have dents from hail are

  • Saved Time – PDR is a shorter repair process than conventional auto body repair
  • Increase Vehicle Value – You cars value will increase. Not just from repairing the damage but also because repainting you car can decrease it’s value
  • Insurance Approved Repair – Insurance companies recommend PDR for most hail damage repair
  • Safer for the Enviroment – No Paint or harsh chemicals are used in the PDR process. Also, not waste or manufacturing is need for new parts to be replaced

If you are in need of hail damage repair for your vehicle, then contact me today.

Excel Dent Removal

1550 91st Ave NE #303

Blaine, MN 55449

phone: 763-780-4000

Removing a Headliner for Hail Damage Repair

I am often asked about taking out the headliner from a car when we are removing dents caused by hail damage. You will see in this video how the headliner comes down and goes back up with no problems.

This time lapse video will show how we can remove the headliner from this truck for paintless dent repair. You will see how it is held in with just some screws, clips and the side plastic pieces. We take all that apart so that we can lower the head-liner. You can see that the headliner is just one solid piece of material made of fabric, foam and fiberglass that is sandwiched together. We only need to lower it enough so that we can access the underside of the roof panel with our paintless dent removal tools. We usually do not need to take it out of the vehicle. This way none of the electrical wires or the airbag system needs to be removed.

After the Hail Damage is Repaired

Once we are done repairing the hail damage from the roof we will then put the headliner back in place, then putting all the clips and screws back. Then everything is returned back to the way it was. You would never know that it was in for repair.

If you need paintless dent repair for your hail damage, then call me at 763-780-4000 or visit my website at http://www.exceldentremoval.com

Excel Dent Removal
1550 91st Ave NE
Suite 303
Blaine, MN 55449

Phone: 763-780-4000

Subscribe to YouTube Channel

Excel Dent Removal On Youtube

Excel Dent Removal Google+ Page

Excel Dent Removal On Facebook

Excel Dent Removal On Twitter

Excel Dent Removal On Linkedin

Headliner Removal For Paintless Hail Damage Repair

Paintless Dent Repair Company in MN
Driving Directions to Excel Dent Removal
http://www.exceldentremoval.com

Excel Dent Removal
1550 91st Ave NE
Suite 303
Blaine, MN 55449

Phone: 763-780-4000

When you need a Paintless Dent Repair Company in Minnesota, then choose the experts at Excel Dent Removal in Blaine MN

In this video you will see how easy it is to find our Blaine location.
We are located in an excellent and easy to get to location, just off the Northeast Corner or Hwy 10 and Central Ave.
These Driving Directions will help you find our Paintless Dent Removal Shop in Blaine.
Our office and shop is located in the industrial building that can be seen from Interstate Hwy 10.

Wherever you are coming from in the Twin Cities of Minneapolis and St Paul you can just get to Hwy 10 and take the Central Ave/Hwy 65 Exit.
Go North on Central to the first light which is 93rd Lane. Take a right on 93rd Lane.
Take your next first right on Baltimore Street then follow it down for a few blocks to 91st Ave.
Take a left on 91st Ave and then we are the second building on the right.
Pull into the first entrance and continue to the south side of the building. Excel Dent Removal is in Suite 303 in the middle.

Contact Me to schedule an appointment for your Free Estimate and to make an appointment to repair your vehicle dents.

Paintless Dent Repair to Remove Damage from Cart

It is a windy day out and you have just come out of the store. You are walking towards your car when you see something that gives you a sinking feeling in your stomach.

A shopping cart is against your car door

You rush up to see if it caused any damage and see a big crease dent in your door.

What do you do?

Well there is good news! You can use Paintless Dent Repair to restore you car back to new again.

Mercedes Dent Removal

This Mercedes C300 came into the my Minnesota Paintless Dent Repair Shop to have this crease removed from the door. My customer said she was out shopping and came out to her car and noticed this 4 inch crease in the door. It looks like it was made by a shopping cart because of the way the impact was made and the horizontal scratches that were in the crease.

A crease dent in the door like this is removed with the paintless dent repair method by accessing the back of the panel and slowly working out the dent with special PDR tools. There was an door safety beam inside the door that caused part of the metal to pushed out. This part is hammered back in to make the area smooth.

If you have had a shopping cart hit your car and make a dent, then choose paintless dent repair to restore your vehicle back to new condition without painting.

IF you want your car looking new again, then contact me at Excel Dent Removal 

Contact Me Today for and Excellent Repair

Excel Dent Removal
1550 91st Ave NE
Suite 303
Blaine, MN 55449

Phone: 763-780-4000

You can see more paintless dent repair videos over on my Youtube Channel

https://www.youtube.com/channel/UC258hHbF9oQsneOGZd7djdQ